A nice & affordable way to seal the LED’s from moisture will be to cut a strip of plastic wrap out and glue it over the LEDs.If unsuccessful, check the connection and make sure plus and minus are correctly soldered. Test connection to AC adapter verifying the LED’s work. Apply LED’s to one side of the strip and solder wires accordingly to LED strips.The wire coat hanger is great for mounting the lighting over the tank and flexible enough to adjust. Next, we will sandwich the two pieces of cardboard around a “wire coat hanger” and wrap it with the black duck tape.Cut out two strips of cardboard to the matching length of the LED strips and allow half an inch of thickness on both sides of the LED strip.that will be the length of speaker wire we will need to power the LED strips. Once the strips are cut, measure out the distance between where the LEDs will be placed and where the AC adapter will connect.cut two strips of lights long enough to reach both ends of the tank in length. First, we need to measure out the length of the tank and figure out how long the strips will need to be on the LEDs.Scissors – For cutting various things like cardboard and LED strip.Wire cutters – Obviously to cut the wires… Scissors worked pretty well though.Measuring Tape – To measure out LED strips and cardboard.Soldering Iron – We will need to solder wires to LED strips once we cut the strips down to size.Adhesive liquid – Hot glue worked best for me but you can also use silicon (takes longer to dry) or super glue (make sure it’s non-toxic).Just make sure it is no thinner than 20 gauge and no thicker than 14 gauge. 16-Gauge Speaker Wire – Any wire will do.Sheet Of Cardboard – This will act as the structure for our LED housing. Saran Wrap – We will use this to seal the LED bulbs surface from potential water damage later after install.Black Duck Tape – This will be used to create the outer surface of the light housing if you don’t stick the LEDs directly to the surface of a preexisting hood or lip.LED Strip Kit – Most kits you will find come with more LED’s than you will need, remote control and dimmable presets.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |